FAPIG

THE FlRST ATOMlC POWER INDUSTRY GROUP

FAPIG誌　最新号目次

1998－7/平成10年度　第１号 (No.149)

　

■東海発電所運転停止特集 巻頭言 (３) 原電工事株式会社社長　塚田浩司 「東海発電所運転停止」特集にあたって (４) 第一原子力産業グループ会長　中里良彦 東海発電所の建設と運転の思い出 (５) 英国NNC社コンサルタント　P T Fletcher 東海発電所の歩み (10) AETPとFAPIGと東海発電所 (12) 能見光彦 / 林　忠正 / 村松多喜夫 あの人はいま (16) 林　　繁 東海炉についての思い出 (21) 藤田元嗣 東海発電所建設の思い出 (25) 本城正八郎 ■ 海外事情 中国国際原子力産業展覧会 (30) 溝口忠雄 / 岡本太志 / 福島笙之介 ■ 報　　告 富士電機のISO14000sへの取組み (34) 牛島靖彦 / 山田　充 ■ 論　　文 多次元混相流シミュレーションコードの開発 (40) 赤松幹夫 多段パッカー方式地下水観測装置を用いた地盤の微小透水係数の原位置測定 (46) 石井　卓 / 中島　均 / 穂刈利之 / 堀田政國 / 菅原　宏 / 間瀬貴久 ■ グループ情報 FAPIGにおける原子力PA活動について (54) 第一原子力産業グループ事務局 FAPIGの機構 (60) 表紙デザイン：矢辺博子 CONTENTS ■Special Issue for "End of Commercial Operation at Tokai Nuclear Power Station" Preface (３) Koji Tsukada A message for the Special Issue (４) Yoshihiko Nakazato Recollection of the Construction and Operation of Tokai Nuclear Power Station (５) P T Fletcher History of Tokai Nuclear Power Station (10) AETP, FAPIG and Tokai Nuclear Power Station (12) M. Nohmi / T. Hayashi / T. Muramatsu The Man, now I miss. (16) S. Hayashi A Memory of Tokai Nuclear Power Station (21) M. Fujita A Memory of the Construction of Tokai Nuclear Power Station (25) S. Honjo ■ Overseas Information China International Nuclear Industry Exhibition NIC-98 (30) T. Mizoguchi / F. Okamoto / S. Fukushima ■ Report Activities for ISO 14000 series in Fuji Electric (34) Y. Ushijima / M. Yamada ■ Paper Development of a Multi-Dimensional Multi-Phase Flow Simulation Code (40) M. Akamatsu In-situ Measuremet of Low Permiability of Formation by Use of MP System (46) T. Ishii / H. Nakajima / T. Hokari / M. Horita / H. Sugawara / T. Mase ■ FAPIG Activities FAPIGﾕs Actvities for Public Acceptance of Nuclear Energy (54) Cover Design：Hiroko Yabe SYNOPSES ●Yasuhiko Ushijima, Mitsuru Yamada Activities for ISO 14000 series in Fuji Electric FAPIG No. 149 pp. 34～39 (1998) In Fuji Electric ISO14001＊ have been introduced and developed so that the addministrative activities will be improved, and before June 1998 all the factories have achieved third-party certification/registration. Through the introduction and development of EMS several invented matters, trial steps, actual results and coming theme to be taken are reported. ISO＊14001 Enviromental management systems-specification with guidance for use. KEYWORD: ISO 14001 ●Mikio Akamatsu Development of a Multi-Dimensional Multi-Phase Flow Simulation Code FAPIG No. 149 pp. 40～45 (1998) The C-CUP method has recently attracted a great deal of attention as the numerical scheme with a universal approach for handling fluid (gas and liquid) and solid from the viewpoint of continuum mechanics. A study has been conducted to confirm the feasibility of the method as the main numerical engine of a multi-dimensional multi-phase flow simulation code. Calculational results for basic problems on gas-liquid system demonstrate strong potential of the method. ●Takashi Ishii, Hitoshi Nakashima, Toshiyuki Hokari, Masakuni Horita, Hiroshi Sugawara, Takahisa Mase In-situ Measurement of Low Permeability of Formation by Use of MP system FAPIG No. 149 pp. 46～53 (1998) Formations which permeability is very low are suitable for the host rock in which repositories of radioactive waste are to be constructed. A practical in-situ test method for measuring very low permeability is desirable to be adapted for confirming the performance of repositories. In-situ permeability tests by use of MP system were executed at a natural bentonite mine as a trial. The build up speed of water table in the MP casing was observed for the term of 80-130days. According to the measured data the hydraulic coefficient of the bentonite formation is order of 10－10cm/s. KEYWORDS : in-situ measurement, permeability test, bentonite